Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Hollywood?
Panel replacement in Hollywood typically costs $250 – $500 for a single damaged section, and most homes fall somewhere in that range. A single dented or cracked panel is usually the cheapest fix on a garage door, and it’s often done in one visit. The written estimate sets the final price, so you’ll know the number before any work starts.
We’re Hollywood Garage Door Repair Pros, and we work on the door already in your garage rather than pushing a replacement you don’t need. One bent section on a door that’s otherwise sound is a panel job, not a new-door job. Call (877) 792-6497 for a free estimate, and don’t wait on a panel that’s cracked, separating from its frame, or letting water in.
Key Takeaways
- Typical Hollywood panel replacement: $250 – $500 for one section, estimated.
- A whole new door runs $700 – $2200, so a single panel is almost always the cheaper path when the rest of the door is solid.
- Brand matters less than section type; we work on Clopay, Amarr, Wayne Dalton, Raynor and the rest of the eight major brands we service.
- Hollywood’s humidity and summer storms are the two things that push panel work here, not cold weather.
- Free estimates, upfront pricing, and a written quote before we touch the door.
Panel Replacement Cost Breakdown (2026)
Here’s how the numbers typically shake out for Hollywood homeowners. These are estimated ranges, not fixed prices. The written estimate sets the final price.
| Job | Typical Estimated Range |
|---|---|
| Single panel replacement, standard steel | $250 – $380 |
| Single panel replacement, insulated or wood-look | $320 – $500 |
| Two or more panels on the same door | $450 – $900 |
| Full panel replacement across a sectional door | $900 – $1800 |
| Panel plus track realignment | $370 – $740 |
| Panel plus cable repair | $380 – $750 |
| New door installation (for comparison) | $700 – $2200 |
| General garage door repair | $150 – $600 |
The single biggest factor is how many panels are affected. One panel is a straightforward swap. Two or three means more material, more labor, and often a color-match question, since panels fade and a new section can look slightly different from the rest of the door. Insulated panels and decorative wood-look sections cost more than plain steel. And if the impact that damaged the panel also knocked the door off its track or stretched a cable, that repair adds to the bill. The ranges above are typical for Hollywood, and you’ll get a written figure before we begin.
What Affects Panel Replacement Pricing in Hollywood
- Panel count. One section sits at the low end of the range. Three or more pushes you toward full-door territory, and at that point we’ll tell you honestly whether a new door makes more sense.
- Material and insulation. Standard steel is the cheapest route. Insulated panels cost more, and they’re worth it here: a south-facing garage in Hollywood gets brutal afternoon sun, and an insulated door keeps that heat from baking the space behind it.
- Brand and section availability. We service Clopay, Amarr, Wayne Dalton, Raynor, and the other major lines, so we can usually source a matching section without swapping the whole door. Obscure or discontinued sections can take longer to source and cost more.
- Color and texture matching. A new panel rarely matches a door that’s spent years in Florida sun. We’ll tell you up front how close the match will be so there’s no surprise when the door goes back up.
- Hidden damage. A panel gets hit, and sometimes the hinges, rollers or track take the impact too. We check the whole door during the estimate, not just the dented section.
- Storm and humidity wear. Hollywood’s wet season and salty storm air take a toll on paint and hardware. Doors that live through a few hurricane seasons often need a panel and a hardware check at the same time.
How Panel Replacement Pricing Works in Hollywood
Hollywood sits in a stretch of South Florida where garage doors face two opposing pressures: intense sun on the west and south faces, and heavy rain during the wet season. A panel that’s cracked or separating lets water into the door’s interior, and once moisture gets behind the skin, the section starts to fail faster than it would in a drier climate. That’s the main reason we recommend handling a damaged panel sooner rather than later here.
The housing stock matters too. Hollywood has everything from mid-century ranch homes to newer construction, and the door styles vary widely. Older doors often use panel profiles that aren’t stocked at the local box store, so a matching section has to be ordered. Newer doors, especially those from Clopay, Amarr, Wayne Dalton and Raynor, tend to have more readily available sections. Either way, we adjust the estimate to what’s actually on your door.
We also work on the opener side of the equation. A door with a bent panel can strain the opener as it cycles, and a struggling LiftMaster, Chamberlain, Genie or Craftsman unit is often the first thing a homeowner notices. If we find opener wear during a panel job, we’ll flag it and quote opener repair separately so you can decide. We handle the diagnosis, the repair, and the full door installation under one company, so nothing gets handed off to a subcontractor.
How to Save on Panel Replacement
Panel work isn’t the place to shop purely on price, but there are real ways to keep the bill down without cutting corners.
- Fix one panel, not three. If only one section is damaged, replace only that section. Some shops will quote a whole door for a single dented panel. We won’t. We’ll tell you when a single swap solves the problem.
- Bundle related repairs. If the track or rollers need attention anyway, doing the work in one visit usually costs less than scheduling two separate trips. Track realignment runs $120 – $240 and roller replacement $110 – $220 on their own, so combining them with a panel job saves you a service call.
- Get the estimate before the damage spreads. A cracked panel that’s letting water in will eventually take hardware with it. Catching it early keeps a small job small.
- Ask about material options. Standard steel often does the job for less than an insulated or wood-look panel. If insulation isn’t a priority for your garage, say so.
- Ask for a written estimate, always. Free estimates and upfront pricing mean you see the number before work starts. Call (877) 792-6497 and we’ll walk you through what your door needs.
One more thing: spring repair is a separate, more dangerous job, and we handle it as a specialty. If a technician ever suggests DIY spring work, walk away. Torsion springs are under extreme tension, and a failed spring can cause serious injury. Trained professionals replace them for $180 – $340 per spring, and a matched pair is usually replaced together, so a pair runs about twice that range. That’s the safe path, and it’s the one we take.
Panel Replacement vs. a New Door: What Makes Sense?
If one or two panels are damaged and the rest of the door is structurally sound, panel replacement is almost always the cheaper answer. Our panel range of $250 – $500 sits well below the $700 – $2200 a new door typically costs in Hollywood, and a panel swap is usually done in a single visit.
Where it flips: when the damage is widespread, when several panels are separating from their frames, or when hidden rot has spread beyond what a surface check would catch. Older wood doors in Hollywood’s humid climate are the ones most likely to hit that point. If we see that during the estimate, we’ll tell you straight. We’re not going to sell you a new door if a panel fixes the problem, and we’re not going to patch a door that’s past saving. Full-spectrum service means we can do either job, so the recommendation comes down to what’s best for your door.
What Happens During a Panel Replacement Estimate
A technician arrives, checks the door panel by panel, and looks at the springs, cables, rollers and track at the same time. Panel damage rarely travels alone, and a bent section usually puts extra load on the hardware around it. The technician will note the brand, the panel profile, and the color, then quote the job in writing before anything is ordered. If the door is a LiftMaster, Chamberlain, Genie or Craftsman system with a smart opener, the technician will check that the opener is calibrated correctly for the new section, since a panel swap that changes the door’s weight can throw off the opener’s travel limits. We work on the brand already in your garage, so familiarity is part of the call.
Our technicians have up to 12 years of experience, and they’ve seen enough panels to know which jobs are simple swaps and which ones are going to turn into something more. That saves you time and keeps the estimate honest.
Do You Need Emergency Panel Replacement in Hollywood?
Most panel jobs aren’t emergencies, but a door that’s stuck open, hanging off its track, or jammed after a storm is. When your door won’t move, we will, and emergency service is built into what we do rather than something tacked on. If a panel is cracked after a storm and the door can’t close, call for emergency service and we’ll book the fastest slot we have. The panel range is the same $250 – $500; emergency scheduling may adjust timing, not the estimate you’re given.
FAQs – Panel Replacement Cost
How much does it cost to replace one garage door panel in Hollywood?
One panel typically costs $250 – $500 in Hollywood, and most single-panel jobs land near the lower end of that range. Insulated and wood-look panels sit toward the top. Call (877) 792-6497 for an exact quote, and estimates are free.
Is it cheaper to repair a panel or replace the whole door?
Repairing a panel is cheaper, usually $250 – $500 compared with $700 – $2200 for a new door. If only one or two sections are damaged and the door is otherwise sound, a panel swap is the sensible call. If several panels are failing or the door’s structure is compromised, replacement is the better value. Call (877) 792-6497 and we’ll tell you which applies to your door.
Can you replace a single panel on a Clopay, Amarr or Wayne Dalton door?
Yes. We service Clopay, Amarr, Wayne Dalton and the five other major brands, so a single matching section is usually available without replacing the whole door. Panel pricing stays in the $250 – $500 range for most single sections, though discontinued profiles may cost more. Call (877) 792-6497 to confirm your brand and section.
How much does panel replacement cost if the track is also bent?
Panel plus track realignment typically runs $370 – $740, since track realignment on its own is $120 – $240. A door that got hit hard enough to bend a panel often needs the track checked too. Call (877) 792-6497 for a written estimate covering both.
Can you come today for a damaged panel?
Same-day service is often available, and we offer fast dispatch from 7am to 7pm. A door that’s stuck open or won’t close is treated as urgent. Call (877) 792-6497 and we’ll get you on the schedule. Estimates are free, and the written quote sets the price.
Why Hollywood Homeowners Call Us for Panel Work
We work on the eight major garage door brands homeowners actually own: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. Eight brands. One call. That means the technician who shows up already knows your door’s system rather than guessing at parts. From opener to overhead door, every job stays with one company, including diagnosis, repair, and full-door installation. Spring repair is handled by trained technicians, not left to a homeowner with a wrench and a YouTube video, and emergency service is there when a door fails at the worst possible moment. The local pro we connect you with is licensed and insured as Florida requires, and we stand behind the work with a satisfaction guarantee.
Panel pricing in Hollywood is estimated at $250 – $500 for a single section, and you’ll get a written quote before any work starts. Free estimates, upfront pricing, and a straight answer about whether you need a panel or a door.
Call for a Free Panel Replacement Estimate in Hollywood
If a panel on your garage door is dented, cracked, or letting water in, don’t wait for it to take the track or opener with it. Call (877) 792-6497 for a free estimate. We’ll check the whole door, quote the panel job in writing, and let you know honestly whether repair or replacement makes more sense. Same-day service and fast dispatch from 7am to 7pm mean you’re not stuck waiting, and upfront pricing means no surprises when the work is done.
Pricing reflects the Hollywood market as of 2026. Hollywood Garage Door Repair Pros offers free estimates – call (877) 792-6497.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Alicia Grant"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Veronica Torres"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Stephanie Thompson